skip to Main Content

Submerged (Roussillon) Automatic Cover: Motor In Dry Mortar

The Roussillon automatic cover is the submerged model which incorporates the motor in a separate sunken compartment, and both the roller axle as well as the cover are housed at one end inside the pool itself.

Clear
SKU: roussillon-motor-dry-motor Categories: , Tag:

Description

The submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or with a PVC partition later on.
The basic elements for assembling the cover are the slats, the step slats, (from page 439), the mechanical kit, the embedding kit, the aluminium tie beam, and the pit cover.

MECHANICAL KIT

Includes the following elements:
– Ø 146 mm extruded aluminium axle, 5 mm thick, and Ø 30 mm joint shaft.
– Motor stand.
– Watertightness joints on bushing side.
– Watertightness joints on bearing stand side.
– 24 V reducer motor with stainless steel stand.
– 220/24V standard switchboard.
– On-off key switch.

Should be installed in full view of the pool. It works by continuous turning of the key.

Additional information

Dimensions N/A
Codes

31144 Maximum pool dimensions 4 x 9 m. 5 mm thick Aluminium axle Ø 146. Reducer motor 120 Nm, 31145 Maximum pool dimensions 5 x 11 m. 5 mm thick Aluminium axle Ø 146. Reducer motor 120 Nm, 31146 Maximum pool dimensions 6 x 12 m. 5 mm thick Aluminium axle Ø 146. Reducer motor 250 Nm, 31904 Maximum pool dimensions 7 x 14 m. 3 mm thick Stainless Steel axle Ø 168.3. Reducer motor 250 Nm, 31909 Maximum pool dimensions 8 x 15 m. 3 mm thick Stainless Steel axle Ø 168.3. Reducer motor 600 Nm, 34767 Maximum pool dimensions 9 x 18 m. Stainless steel axle Ø 300 mm. Reduce motor 600 Nm, 34768 Maximum pool dimensions 10 x 20 m. Stainless steel axle Ø 300 mm. Reduce motor 600 Nm, 34769 Maximum pool dimensions 11 x 22 m. Stainless steel axle Ø 300 mm. Reduce motor 600 Nm, 43221 Maximum pool dimensions 4 x 20 m. 5 mm thick Aluminium axle Ø 196. Reducer motor 120 Nm

Search